febi bilstein Reviews 

Dreadfull company that sacked an entire warehouse operation under them would never use their parts because they are just awfull welding on leaf springs looks like its been done by a child

I replaced two lower arms on a mercedes which failed in 18 months and control arm on a fiesta which lasted 2 years and 6000 Miles!!!!!. Thanks to car parts in motion I got a refund for the fiesta ones as they had a 3 year warranty. They now have a 1 year warranty. Dont waste your time and money they are rubbish appalling quality. The ball joints were literally hanging out. Stick with lemforder or meyle HD.

Parts are great quality for what you pay, however as a mechanic, I would place this in my mid tier section of recommending parts to customers. You get what you pay for, the castings aren't the best shape how an OEM or genuine part would be, but does a decent job as a replacement part.

Bushings and rubber parts are okay and structurally last well and suffer normal defamation as per expectancy due to wear and tear.

Oils / additives - I don't have any experience using but from other reviews or assumptions, seems to be okay.

Overall bad quality on parts like valve covers, CCV's, DISA valves and so on, fails prematurly.

Parts like coolant hoses, minor bushings and such has seemed to be okey/good but not always there either.

Their oils (steering, engine and such) seems also to be alright.

I am avoiding this brand now day & SWAG who also sells exactly same products as Febi. I have had to many bad experiences with their parts to be able to trust them anymore.

Poor quality brake pads that squeal constantly, unfortunately this is the second set fitted by a garage that squeal all day every day, had a Bosch set in between the febi Bilstein ones with no noise whatsoever. Do not buy brake pads from this brand, they obviously make pads with too high metal content that cause the noise

very poor quality been working there as QC inspector and cam tell is rubbish

Great parts and at competative prices.

My goto brand for minor car repairs and service kits.

Never had an issue with any parts bought from this company.

I choose brake components from Febi Bilstein. High quality parts and have never let me down

Ordered part through Parts-in-Motion, a BMW brake splash shield made by well known brand Febi owned by Bilstein, a Germany company.

The part requires a slot (hole) for handbrake shoe pin which is flat to fit the pin through then turns 90 deg, to secure. This part had NO SLOT. As I had to replace this quickly I drilled to make a slot but wasn't perfect since drill bits are round. It should have been punched out in manufacturing. Fitted but soon handbrake was defective and metal screeching, suspected grinding into disc so a new disc may be required and these were Brembo sports discs.

Contacted Parts in Motion, spoke to Tom, who was unable to supply an Apec alternative FOC as it had been fitted and modified. APEC BRAKE DISC SPLASH PANEL REAR RIGHT ASG1027.

I'd have thought Parts-in-Motion could have taken this up with the manufacturer, so something I'll have to do.

Parts-in-Motion Order number: 19-11625-25308

FEBI part: 171549 Brake Disc Splash Panel for 120D